Choosing the correct finish for hardwood and softwood beams
Traditional oils and waxes are more appropriate on old beams and look better than modern finishes.
If the beams are very dry and you don't mind them darkening slightly, use Finest Danish Oil or Raw Linseed Oil diluted with White Spirits. Apply to the wood by brush and allow to penetrate before wiping off all excess oil.
For a paler shade on pine or oak Liquid Beeswax is a better option. Again apply to the wood by brush and wipe off all of the excess with a cloth as with oils.
On smoother beams use Paste Beeswax rather than liquid applying by cloth or Ultra Fine 0000 grade Steel Wool before buffing along the grain with a Furniture Waxing Brush or a soft cloth.
Expert Advice, Simple Solutions, Beautiful Wood
All of the information offered in this Question and Answer format is given in good faith and no responsibility can be accepted for loss or damage however caused. Always carry out a test before proceeding and if in doubt, contact our free wood finishing Advice Line on 01246 261664 before starting.
Our range of wood finishing products has been developed over many years so that customers can be assured of compatibility and of achieving excellent results. The advice given here refers solely to the specific products mentioned and not to other manufacturers products which although may appear to be similar, invariably are not.